Drive-Thru G01 WIDE
Design for your higher satisfaction. Just do it as the type you want!
Drive-Thru G01 WIDE
- Bimodal (2-way) Wheel Washing System
- Auto Sludge Discharge by Conveyor System
- Recycling Used Water
- Auto Operation Using a Photo Sensor
- Checks Washing Time by a Counter
- Emergency Stop Button
| Dimension | W2200 x L5850 x H2054 (mm) | |
| Applicable vehicle | Max. width of 3440 mm | |
| Power consumption | 16.50 Kw | |
| Gross weight | 4,000 Kg | |
| Sensing | Photo sensor | |
| Submersible pump | 15Kw x 2P | Horizontal | |
| Scraper Drive Motor | 0.75 Kw x 4P | |
| Water jet pressure | 2.5 ~ 3 Kg/cm² | |
| Main power | 380/415V x 3ø x 50/60Hz (Optional) | |
| Washing capacity | Over 300 Vehicles/day | |
| Nozzle | Side pipe – 36 pcs, Main frame – 72 pcs | |
| Side screen | 1 layer (1m) | |
| Side pipe | 2 inches | |
| Pipe linking | 2 inches Union & Flange | |
| Control Panel | Steel / Dual door | |
| Options | Floculante injector | |
| Heater |
Step 1: Entry
A truck enters slowly into the wheel waasher with a speed of 5km/h and stops infront of the sensor momentarily.
Step 3: Exit
The washer washes both the front and rear wheels while the truck passes, and the truck advances to the road.
Step 2: Drive-Thru
The sensor detects the truck, and then the washer sprays water and washes the truck as it passes slowly.Drive-Thru G01 WIDE
